Tasmota v14.6.0 Ryan

RELEASE NOTES Migration Information This version removes support for direct migration from versions before v8.1.0 (Doris) See migration path for instructions how to migrate to a major version. Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial. If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version. Pay attention to the following version breaks due to dynamic settings updates: Migrate to Sonoff-Tasmota 3.9.x Migrate to Sonoff-Tasmota 4.x Migrate to Sonoff-Tasmota 5.14 (http://ota.tasmota.com/tasmota/release_5.14.0/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin) --- Major change in parameter storage layout --- Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin) --- Major change in internal GPIO function representation --- Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz) Upgrade to latest release (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz) While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v9.1.0 Imogen the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing v9.1.0. Supported Core versions This release will be supported from ESP8266/Arduino library Core version 2.7.8 due to reported security and stability issues on previous Core version. This will also support gzipped binaries. This release will be supported from ESP32/Arduino library Core version v3.1.3.250411. Support of ESP8266 Core versions before 2.7.8 and ESP32 Core versions before v3.1.3.250411 have been removed. Support of TLS In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read full documentation Initial configuration tools For initial configuration this release supports Webserver based WifiManager or Serial based command interface. Initial installation Easy initial installation of Tasmota can be performed using the Tasmota WebInstaller. Provided Binary Downloads ESP8266 or ESP8285 based The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.8. tasmota.bin = The Tasmota version with most drivers for 1M+ flash. RECOMMENDED RELEASE BINARY tasmota-4M.bin = The Tasmota version with most drivers and filesystem for 4M+ flash. tasmota-AD.bin to tasmota-VN.bin = The Tasmota version in different languages for 1M+ flash. tasmota-lite.bin = The Lite version without most drivers and sensors for 1M+ flash. tasmota-knx.bin = The Knx version without some features but adds KNX support for 1M+ flash. tasmota-sensors.bin = The Sensors version adds more useful sensors for 1M+ flash. tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash. tasmota-display.bin = The Display version without Energy Monitoring but adds display support for 1M+ flash. tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version for 2M+ flash. tasmota-zigbee.bin = The dedicated cc25xx Zigbee Bridge version for 4M+ flash. Above binaries are also available as gzipped version allowing faster uploads. Latest released binaries can be downloaded from https://github.com/arendst/Tasmota-firmware/tree/firmware/release-firmware http://ota.tasmota.com/tasmota/release Historical binaries can be downloaded from http://ota.tasmota.com/tasmota/release-14.6.0 The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz ESP32, ESP32-C2, ESP32-C3, ESP32-C6, ESP32-S2 and ESP32-S3 based The following binary downloads have been compiled with ESP32/Arduino library core version v3.1.3.250411. tasmota32.bin = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. RECOMMENDED RELEASE BINARY tasmota32solo1.bin = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash. tasmota32s2.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S2 with serial and 4M+ flash. tasmota32s2cdc.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S2 with serial over embedded USB CDC only and 4M+ flash. tasmota32s3.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S3 with USB HWCDC and fallback to serial and 4M+ flash. tasmota32c2.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C2 with serial and 4M+ flash. tasmota32c3.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3 with USB HWCDC and fallback to serial and 4M+ flash. tasmota32c6.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C6 with USB HWCDC and fallback to serial and 4M+ flash. tasmota32-AD.bin to tasmota32-VN.bin = The Tasmota version in different languages for 4M+ flash. tasmota32-bluetooth.bin = The Bluetooth version adds BLE support for 4M+ flash. tasmota32-display.bin = The Display version without Energy Monitoring but adds display support for 4M+ flash. tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash. tasmota32-lvgl.bin = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash. tasmota32-nspanel.bin = The Sonoff NSPanel Smart Scene Wall Switch version with HASPmota display support. tasmota32-webcam.bin = The Webcam version adds webcam support for 4M+ flash. tasmota32-zbbridgepro.bin - The Sonoff Zigbee Bridge Pro version with CC2652P firmware load support. Latest released binaries can be downloaded from https://github.com/arendst/Tasmota-firmware/tree/firmware/release-firmware https://ota.tasmota.com/tasmota32/release Historical binaries can be downloaded from https://ota.tasmota.com/tasmota32/release-14.6.0 The latter links can be used for OTA upgrades too like OtaUrl https://ota.tasmota.com/tasmota32/release/tasmota32.bin Additional information List of embedded modules. Complete list of available feature and sensors. Changelog v14.6.0 Ryan Added Filesystem command UfsList[2] Extend command GPIO with different display options and allowing updating of module GPIO's in one go Support Vango Technologies V924x ultralow power, single-phase, power measurement #23127 Support for HLK-LD2402 24GHz smart wave motion sensor #23133 Support for Telnet server using command Telnet <0|1|port>[,] if enabled with #define USE_TELNET Support for XMODEM over serial and telnet if enabled with #define USE_XYZMODEM PZEM_AC device address in JSON and GUI #23268 Allow acl in mqtt when client certificate is in use with #define USE_MQTT_CLIENT_CERT #22998 AlpineJS 2.8.2 - optional for now #23259 ESP32 show network interface priority in Status 5 debug logging #23302 Berry experimental driver for AXP2101 for M5Core2v1.1 #23039 Berry tasmota.when_network_up() and simplified Matter using it #23057 Berry introspect.solidified() to know if a Berry object is solidified or in RAM #23063 Berry global.undef() to undefine a global variable #23073 Berry load .tapp files in /.extensions/ then in / #23113 Berry re.dump() #23162 Berry bytes.add() now accepts 3-bytes values #23200 Berry expose esp_http_server for websockets #23206 Matter prepare for ICD cluster #23158 LVGL experimental mirroring of display on Web UI #23041 HASPmota autostart when pages.jsonl exists #23181 Breaking Changed Berry remove Leds.create_matrix from the standard library waiting for reimplementation #23114 HASPmota added y2_min and y2_max to control the second series of chart #23287 HASPmota default theme is now Tasmota-style #23288 Changed ESP32 Platform from 2025.02.30 to 2025.04.30, Framework (Arduino Core) from v3.1.1.250203 to v3.1.3.250411 and IDF from v5.3.2.250120 to 5.3.2.250403 #23280 Output of commands GPIO and GPIOs swapped Smoothen light gamma curve when using Fade #23230 RCSwitch RCSWITCH_SEPARATION_LIMIT from 4100 to 3600 GPIOViewer from v1.6.1 to v1.6.2 (No functional change) HLK-LD2402 updates for firmware 3.3.5+ #23281 ESP8266 enable FTP for >= 4MB variants #23120 ESP32 enable webcam version 2 #18732 Berry update flasher for Sonoff ZBBridge Pro #23136 Berry re now accepts bytes() as precompiled patterns, added re.compilebytes() #23149 LVGL, prepare for HASPmota theme, change: no-grow when clicked, DPI set to 160 #23040 LVGL Mirroring add checkbox to enable/disable the feature (in the iterim for a better solution) #23047 Leds Panel add checkbox to enable/disable the feature (in the iterim for a better solution) #23048 Fixed Too many zeros in RCSwitch received data regression from v14.4.1.4 #23050 INA226 driver fixes #23197 TLS increase timeout and fix crash #23249 ESP32 receive incomplete serial data over 128 bytes #23156 ESP32 intermittent exception on WiFi AP cannot be reached #23115 ESP32-C3 WiFi sleep #23096 Berry prevent import from hiding a solidified class #23112 Berry readline when a line is exactly 98 characters #23276 Removed